|
| Liquid Cationic Polyamine Polymer - ( RUB FLOCK 200 ) |
| |
RUB FLOCK 200 is a quality color removal chemical from Rubmach Industries. This product is lower molecular weight organic coagulants. RUB FLOCK 200 forms insoluble matter with the coloring matter lives in the waste water especially from that of a textile factory, paints and pigments; intermediates for dyes and chems; pharmaceutical wastes; Dairy and milk processing units. It is an in house development, is in response to the today's market requirement.
By processing with RUB FLOCK 200, we can transfer industrial waste water into process water.
|
| |
| COAGULANTS & SETTELING |
- RUB FLOCK 200 can be taken in use along with alum; or Ferrous sulphate; or zirconius salts. 300 to 500 ppm. of inorganic coagulants such as alum etc; need from 50 to 200 ppm of RUB FLOCK 200, for total removal of most of the industrial wastes from waste waters and lower the sludge volume.
- The charge carried by the polymer is liable for the pensiveness of dissolved coloring matter from the colored waste water in the colloidal appearance. It removed from the clarifier in the form of a thick slush by the sedimentation. In case of enlargement of flocs that are formed is required; it is advised to use around 1 to 5 ppm of anionic polymer "RUB FLOCK 100" series of polyelectrolyte at the last of flocculation.
|
| |
| SCHEMATIC OF WASTE WATER TREATEMENT FOR DYESTUFF MANUCACTURESS & TEXTILE MILLS: |
RUB FLOCK 200 is effective cationic high charge thickness polyamine effective at wide pH range. |
| |
| PHYSICAL PROPERTIES: |
| Appearance |
Yellow, liquid |
| Ionic Nature |
Cationic |
| Solubility |
Completely Soluble in water |
| pH |
4 ± 1 |
| Flash |
Non flammable |
| Active matter |
50% |
| Specific gravity |
1.12 - 1.153 |
| Shelf Life |
12 Months |
| Effective pH |
Over wide range |
|
| Handing of RUB FLOCK 200 requires no special provision and treatment with generally caution reserved for chemicals in general recommended. Spillages OR slippery are to be flashed with water. |
| |
|
| ADVANTAGES: |
| - Ease of application because it is a liquid form. |
| - You can apply it alone or in conjunction with other polymers and metal sulphates. |
| - Non corrosive of suggested dosage, economical and effective at low levels. |
| - Can eliminate the use of alum & further ferric salts when used as primary coagulants. |
|
| |
| APPLICATION AREA: |
| Pulp & Paper |
Dewatering, effluent decolourizing |
| Textile |
Sedimentation of wool washing/ colour removal from industrial effluent |
| Dyes |
Decolourizing effluent |
| Oil Refineries |
Oil recovery of oil refineries waste water |
| Water treatment |
Low turbidity water clarification |
| Waste Water |
Activated sludge dewatering |
| Leather |
Purification of its effluents |
| Other |
General purpose coagulants and clarifying agent. |
|
| |
| SAFETY AND HANDLING: |
| - RUB FLOCK 200 is a stable polymer. But storage in ambient conditions is suggested opened containers are to be closed tight to prevent the loss of moisture present in it which may or lead to increase in viscosity of the product. |
| - Store in dark and cool place. |
| |
| POLYMER FEED SYSTEM: |
- Preparation of solution - Stock solution of RUB FLOCK 200 may expediently be prepared at a concentration of 0.1% and ideally diluted to 1% while dosing. It is freely soluble in water and mild agitations enough for a uniform solution in a short time.
- Feeding of the solution - A positive displacement pump is recommended for feeding Rub Flock 200 solution into the water stream at a point where maximum turbulence is available so that through mixing and good contact with dispersed particles are ensured
- Dosage - By lab. Trail we can decide the dose
|
| |
| Package And Storage : |
| RUB FLOCK 200 is supplied in 50/200 kgs. Polydrums. |
| |
